Connect with us

Science

Researchers discharge new view from OSIRIS-REx’s asteroid smash and grab

Published

on

Researchers state the dicey arriving by NASA’s OSIRIS-REx spacecraft on a asteroid a month ago uncovered new experiences into the structure of free shakes that may cover the surfaces of numerous little planetary bodies — material that is more likened to a play area ball pit than strong bedrock.

The structure of the asteroid’s peripheral layer is clear in symbolism caught by the OSIRIS-REx rocket as it plunged down to the airless world in excess of 200 million miles (330 million kilometers) from Earth on Oct. 20.

The following day, NASA delivered symbolism from a restricted point camera focused on the rocket’s 11-foot-long (3.4-meter) automated arm. A supper plate-sized example assortment gadget toward the finish of the arm terminated a container of packed nitrogen gas as the rocket reached the outside of asteroid Bennu, a little planetary body estimating around 33% of a mile in width.

The release of nitrogen gas helped power space rock examples into the assortment chamber. Following six seconds on the asteroid’s surface, OSIRIS-REx terminated engines to move in an opposite direction from Bennu.

Researchers later got close-up pictures of the example assortment head, showing it packed with material gathered up from the space rock’s surface. Some space rock particles were noticeable getting away from the assortment chamber, inciting supervisors to order the shuttle to stow the example head inside its Earth return container sooner than anticipated, limiting the loss of examples.

The testing gadget was fixed inside the OSIRIS-REx shuttle’s return container Oct. 28.

Toward the end of last week, authorities delivered another arrangement of pictures taken during the rocket’s tricky landing. These were caught by a wide-point route camera on OSIRIS-REx.

As per the OSIRIS-REx science group, the route camera — or NavCam — pictures were caught over a time of around three hours. The grouping starts around an hour after OSIRIS-REx played out a circle flight move to start its plunge, and finishes around two minutes after the shuttle’s step back consume, authorities said.

A huge number, or revolution, move is obvious in the picture arrangement as OSIRIS-REx focuses its examining arm toward target inspecting site on asteroid Bennu, a locale named “Nightingale.”

“As the spacecraft nears site Nightingale, the sampling arm’s shadow comes into view in the lower part of the frame. Shortly after, the sampling head impacts site Nightingale (just outside the camera’s field of view to the upper right) and fires a nitrogen gas bottle, which mobilizes a substantial amount of the sample site’s material,” the OSIRIS-REx team wrote in a description of the NavCam imagery.

“Several seconds later, the spacecraft performs a back-away burn and the sampling arm’s shadow is visible against the disturbed surface material. The team continues to investigate what caused the extremely dark areas visible in the upper and middle parts of the frame,” the team wrote. “The upper area could be the edge of the depression created by the sampling arm, a strong shadow cast by material lofted from the surface, or some combination of the two.

“Similarly, the middle dark region that first appears in the lower left of the image could be a depression caused by one of the spacecraft thrusters as it fired, a shadow caused by lofted material, or a combination of both.”

The Lockheed Martin-manufactured OSIRIS-REx shuttle depended on the highly contrasting route camera pictures to independently manage itself to a protected score zone on Bennu. Route calculations contrasted the camera’s pictures with a guide pre-stacked into the shuttle’s PC, helping OSIRIS-REx decide its area comparative with the asteroid.

With its example made sure about in the return container, OSIRIS-REx is set to leave the region of asteroid Bennu one year from now to start the outing back to Earth. The shuttle will deliver the return container for reemergence into Earth’s air and arriving at the Utah Test and Training Range on Sept. 24, 2023.

NASA’s $1 billion Origins, Spectral Interpretation, Resource Identification, Security, Regolith Explorer mission dispatched Sept. 8, 2016, from Cape Canaveral on board a United Launch Alliance Atlas 5 rocket. OSIRIS-REx’s essential objective is to restore asteroid tests to Earth for point by point investigation by researchers, who would like to reveal pieces of information about the sources of the nearby planetary group.

The mission necessity was for OSIRIS-REx to accumulate in any event 60 grams, or 2.1 ounces, of asteroid material. Researchers said before the Oct. 20 tricky handling that the rocket could gather substantially more, and proof proposes it probably trapped more than 2.2 pounds, or 1 kilogram, of space rock examples, as per Dante Lauretta, the mission’s essential specialist from the University of Arizona.

Information from the short score on the asteroid demonstrated the rocket’s mechanical arm sunk up to 19 inches (48 centimeters) into the Bennu’s delicate surface.

While the mission’s logical result will stand by until the asteroid tests re-visitation of Earth, Lauretta said Thursday that researchers are as of now finding out about the actual attributes of Bennu.

The rocket recognized little particles taking off Bennu not long after it showed up at the asteroid in December 2018. Those particles seem like the flaky material that spilled out of the TAGSAM head.

“It looks like a box of cornflakes out in space,” Lauretta said. “And they’re fluttering around kind of in random motion. They are coming from the TAGSAM head for the most part, but they are colliding with each other. They’re spinning and tumbling. We can resolve many of them.

“So it’s a great imaging calibration data set to better understand the particle ejection events, and the particles trajectories that we observed throughout the entire encounter with the asteroid,” Lauretta said. “Wven though my heart breaks for the loss of sample, it turned out to be a pretty cool science experiment.”

OSIRIS-REx’s contact with the asteroid surface Oct. 20 additionally gave a rich dataset, recommending the external layer of the asteroid’s dirt and low-thickness rocks needed a lot of union. The shuttle’s mechanical arm contacted the asteroid as OSIRIS-REx drew nearer at simply 0.2 mph, or 10 centiemters for each second, about a 10th the speed of a common strolling pace.

“When the TAGSAM head made contact with the regolith, it just flowed away like a fluid,” Lauretta said. “And I think that’s what would happen to an astronaut if she were to attempt to walk on the surface of the asteroid. She would sink to her knees or deeper — depending on how loose the soil was — until you hit a larger boulder or some kind of bedrock.”

He said the “ground truth” information assembled by OSIRIS-REx will assist researchers with rethinking models of space rock topography.

“It’s fascinating that there was so little resistance to the spacecraft from the asteroid surface,” Lauretta said. “Basically, it’s kind of like a ball pit at a kid’s playground. You kind of jump into it and you just sink in.

“Luckily, we had those back-away thrusters to reverse the direction of motion, or we might have just flown all the way through the asteroid,” Lauretta joked.

The new estimations of space rock thickness from OSIRIS-REx will assist researchers with refining appraisals of the effect hazard Bennu may posture to Earth. Researchers have determined a 1-in-2,700 likelihood that Bennu may strike Earth in the last part of the 2100s.

A great part of the space rock may wreck in Earth’s climate because of its porosity.

“Thermal analysis indicates that a lot of the material on the surface of Bennu — particularly the large black hummocky boulders which are a major component of the surface — they seem to have material properties that would not survive passage through the atmosphere intact,” Lauretta said. “They would fragment, and much of the material will be lost.”

That implies the perfect examples gathered from Bennu are not normal for any shooting stars or asteroid pieces that have tumbled to Earth and arrived at the surface flawless.

Science

China’s Tianwen-2 Set for Launch to Asteroid and Comet

Published

on

China’s Tianwen-2 Set for Launch to Asteroid and Comet

China has taken a major step forward in its deep-space exploration efforts as the Tianwen-2 spacecraft arrived at the Xichang Satellite Launch Center in Sichuan province for final launch preparations. The China National Space Administration (CNSA) confirmed the development on February 20, 2025, signaling that the mission is on track for its scheduled launch in the first half of the year.

A Dual-Purpose Mission

The Tianwen-2 mission is a combined near-Earth asteroid sample return and comet rendezvous mission, marking another ambitious endeavor for China’s space program. The mission is set to launch aboard a Long March 3B rocket, with a tentative liftoff expected around May 2025.

The primary target of Tianwen-2 is the near-Earth asteroid Kamoʻoalewa (2016 HO3), a small celestial body with a diameter estimated between 40 to 100 meters. The asteroid is considered a quasi-satellite of Earth, meaning it follows a co-orbital path with our planet. Scientists believe Kamoʻoalewa might be a fragment of the Moon, ejected into space after an ancient impact event.

After collecting samples from Kamoʻoalewa, the main spacecraft will continue its journey to comet 311P/PANSTARRS, a celestial body that exhibits both asteroid-like and comet-like characteristics. By studying these two objects, scientists aim to gain valuable insights into the composition, evolution, and history of the solar system, including the distribution of water and organic molecules.

Launch Preparations Underway

CNSA stated that the launch site facilities are fully prepared, and pre-launch tests are proceeding as planned. Engineers and scientists are meticulously working to ensure the spacecraft is ready for its complex mission, which will involve multiple orbital maneuvers, sample collection, and deep-space travel over nearly a decade.

Sampling Kamoʻoalewa: Two Innovative Techniques

To collect material from Kamoʻoalewa, Tianwen-2 will employ two advanced sampling methods:

  1. Touch-and-Go (TAG) Method – This technique, used by NASA’s OSIRIS-REx and JAXA’s Hayabusa2 missions, involves briefly touching the asteroid’s surface to gather samples.
  2. Anchor-and-Attach System – This approach uses drills attached to the spacecraft’s landing legs, allowing for a more stable and secure extraction of subsurface material.

Early mission concepts, when Tianwen-2 was initially known as Zheng He, indicated that China aimed to collect between 200 and 1,000 grams of asteroid samples. These samples will help scientists analyze Kamoʻoalewa’s mineral composition, origin, and potential similarities with lunar material.

Challenges in Sample Return

Although China has successfully executed two lunar sample return missions—Chang’e-5 (2020) and Chang’e-6 (2024)—returning asteroid samples presents unique challenges. Unlike the Moon, Kamoʻoalewa has negligible gravity, requiring specialized landing and sampling techniques. Additionally, the reentry module carrying the samples will experience higher velocities, demanding advanced thermal protection and parachute deployment systems.

To address these challenges, the China Aerospace Science and Technology Corporation (CASC) conducted high-altitude parachute tests in 2023, ensuring the safe return of asteroid samples to Earth around 2027.

Comet Rendezvous: Studying 311P/PANSTARRS

Returning samples from Kamoʻoalewa will not mark the end of Tianwen-2’s mission. The spacecraft will execute a gravitational slingshot maneuver around Earth, propelling it toward comet 311P/PANSTARRS in the main asteroid belt. The rendezvous is expected around 2034.

311P/PANSTARRS is considered a transitional object between asteroids and comets, making it an ideal candidate for studying the origins of cometary activity within the asteroid belt. Scientists hope to analyze its orbit, rotation, surface composition, volatile elements, and dust emissions, shedding light on the evolution of comets in the inner solar system.

Scientific Instruments on Board

The Tianwen-2 spacecraft is equipped with a suite of cutting-edge instruments to study its targets, including:

  • Multispectral and infrared spectrometers – To analyze surface composition.
  • High-resolution cameras – To map geological features in detail.
  • Radar sounder – To probe subsurface structures.
  • Magnetometer – To search for residual magnetic fields.
  • Dust and gas analyzers – To examine cometary activity.
  • Charged particle detectors – To study interactions with the solar wind (developed in collaboration with the Russian Academy of Sciences).

China’s Expanding Deep-Space Ambitions

Tianwen-2 follows the highly successful Tianwen-1 Mars mission, which saw China land the Zhurong rover on Mars in 2021. The Tianwen series is a key part of China’s growing presence in deep-space exploration:

  • Tianwen-3 – A Mars sample return mission, scheduled for 2028–2030.
  • Tianwen-4 – A Jupiter system exploration mission, launching around 2030, featuring a solar-powered orbiter for Callisto and a radioisotope-powered spacecraft for a Uranus flyby.

Chinese researchers have emphasized the importance of asteroid sample return missions, citing their potential for groundbreaking scientific discoveries and the development of new space technologies.

With Tianwen-2, China is taking a bold step into the future of deep-space exploration. By returning samples from an asteroid and studying a comet, the mission will provide crucial insights into the origins of the solar system and planetary evolution. As launch preparations continue, the world eagerly anticipates another milestone in China’s space program.

Continue Reading

Science

SpaceX to Launch 21 Starlink Satellites from Florida on February 4

Published

on

SpaceX to Launch 21 Starlink Satellites from Florida on February 4

SpaceX plans to launch another batch of Starlink satellites into orbit from Florida’s Space Coast on February 4, 2025. The mission will deploy 21 Starlink satellites, including 13 equipped with direct-to-cell communications capabilities, marking another major step in SpaceX’s ambitious plan to provide global high-speed internet coverage.

The Falcon 9 rocket flight from Cape Canaveral Space Force Station is scheduled to take place during a roughly three-hour launch window that opens at 3:37 a.m. (0837 GMT). SpaceX will livestream the event on its X account (formerly Twitter), with coverage beginning about five minutes before liftoff.

The mission will use the experienced Falcon 9 first-stage rocket, which will be making its 21st launch and landing. According to SpaceX, this rocket has already flown on 20 missions, 16 of which were dedicated Starlink launches. If all goes as planned, the rocket will return to Earth about eight minutes after liftoff, landing on the unmanned “Just Read the Instructions” craft in the Atlantic Ocean.

The Falcon 9 upper stage will continue its journey to deploy 21 Starlink satellites into low Earth orbit (LEO) about 65 minutes after liftoff. This will be SpaceX’s 15th Falcon 9 mission in 2025, with nine flights dedicated to expanding the Starlink constellation.

Direct-to-cell capabilities


A notable feature of this mission is the inclusion of 13 Starlink satellites with direct-to-cell capability. These advanced satellites are designed to enable seamless connectivity for standard mobile phones, eliminating the need for specialized hardware. This technology has the potential to revolutionize communications in remote and underserved areas, providing reliable internet and cellular services directly to users’ devices.

The growing Starlink constellation


SpaceX is rapidly expanding its Starlink network, which is already the largest satellite constellation ever assembled. In 2024 alone, the company launched more than 130 Falcon 9 missions, about two-thirds of which were dedicated to Starlink deployments. According to astrophysicist and satellite tracker Jonathan McDowell, SpaceX currently operates nearly 7,000 Starlink satellites in LEO.

The Starlink network aims to provide high-speed, low-latency internet access to users around the world, especially in regions lacking traditional infrastructure. With this latest launch, SpaceX is expanding the network’s capacity and coverage, bringing its dream of global connectivity closer to reality.

Recyclability and sustainability


The Falcon 9 rocket’s first-stage booster exemplifies SpaceX’s commitment to reusability, a key factor in reducing the cost of spaceflight. By successfully landing and reusing the rocket, SpaceX has revolutionized the aerospace industry and set a new standard for sustainable space operations.

However, the rapid expansion of the Starlink constellation has raised concerns among astronomers and environmentalists. The growing number of satellites in LEO has created problems such as light pollution, which can interfere with astronomical observations, and space debris, which poses a threat to other spacecraft. SpaceX is actively working to mitigate these issues by implementing measures such as blacking out satellite surfaces and responsibly deorbiting inactive satellites.

The February 4 launch is part of SpaceX’s broader strategy to achieve global internet coverage and support its growing customer base. With the addition of direct-to-cell-connect satellites, the company is poised to offer even more versatile and simple connectivity solutions.

As SpaceX pushes the boundaries of space technology, the world will be watching to see how the Starlink network evolves and addresses the challenges associated with large-scale satellite constellations. For now, the focus is on the upcoming launch, which will mark another milestone in SpaceX’s journey to connect the world.

Continue Reading

Science

Scientists Trap Molecules for Quantum Tasks, Paving the Way for Ultra-Fast Tech Advancements

Published

on

Scientists Trap Molecules for Quantum Tasks, Paving the Way for Ultra-Fast Tech Advancements

In a groundbreaking milestone for quantum computing, researchers from Harvard University have successfully trapped molecules to perform quantum operations. This achievement marks a pivotal advancement in the field, potentially revolutionizing technology and enabling ultra-fast computations in medicine, science, and finance.

Molecules as Qubits: A New Frontier

Traditionally, quantum computing has focused on using smaller, less complex particles like ions and atoms as qubits—the fundamental units of quantum information. Molecules, despite their potential, were long considered unsuitable due to their intricate and delicate structures, which made them challenging to manipulate reliably.

However, the latest findings, published in the journal Nature, change this narrative. By utilizing ultra-cold polar molecules as qubits, the researchers have opened up new possibilities for performing quantum tasks with unprecedented precision.

A 20-Year Journey to Success

“This is a breakthrough we’ve been working toward for two decades,” said Kang-Kuen Ni, Theodore William Richards Professor of Chemistry and Physics at Harvard and senior co-author of the study.

Quantum computing leverages the principles of quantum mechanics to perform calculations exponentially faster than classical computers. It has the potential to solve problems that were once deemed unsolvable.

“Our work represents the last critical piece needed to construct a molecular quantum computer,” added co-author and postdoctoral fellow Annie Park, highlighting the significance of this achievement.

How Molecular Quantum Gates Work

Quantum gates, the building blocks of quantum operations, manipulate qubits by taking advantage of quantum phenomena like superposition and entanglement. Unlike classical logic gates that process binary bits (0s and 1s), quantum gates can process multiple states simultaneously, exponentially increasing computational power.

In this experiment, the researchers used the ISWAP gate, a crucial component that swaps the states of two qubits while applying a phase shift. This process is essential for creating entangled states—a cornerstone of quantum computing that allows qubits to remain correlated regardless of distance.

Overcoming Long-Standing Challenges

Earlier attempts to use molecules for quantum computing faced significant challenges. Molecules were often unstable, moving unpredictably and disrupting the coherence required for precise operations.

The Harvard team overcame these obstacles by trapping molecules in ultra-cold environments. By drastically reducing molecular motion, they achieved greater control over quantum states, paving the way for reliable quantum operations.

The breakthrough was a collaborative effort between Harvard researchers and physicists from the University of Colorado’s Center for Theory of Quantum Matter. The team meticulously measured two-qubit Bell states and minimized errors caused by residual motion, laying the groundwork for even more accurate future experiments.

Transforming the Quantum Landscape

“There’s immense potential in leveraging molecular platforms for quantum computing,” Ni noted. The team’s success is expected to inspire further innovations and ideas for utilizing the unique properties of molecules in quantum systems.

This advancement could significantly alter the quantum computing landscape, bringing researchers closer to developing a molecular quantum computer. Such a system would harness the unique capabilities of molecules, opening doors to unprecedented computational possibilities.

The Road Ahead

The implications of this achievement extend far beyond academia. By unlocking the potential of molecules as qubits, the researchers have taken a vital step toward creating powerful quantum computers capable of transforming industries ranging from pharmaceuticals to financial modeling.

As researchers continue to refine this technology, the dream of a molecular quantum computer—one that capitalizes on the complexities of molecular structures—moves closer to reality. This breakthrough represents not just a leap forward for quantum computing but a glimpse into the future of technology itself.

Continue Reading

Trending

error: Content is protected !!